Since we clean our toilets regularly, we should know some tricks of cleaning toilet bowls with vinegar and baking soda. Sometimes, I forget to clean my toilet bowl for a week and then find strong stains that are not easy to remove.
They are too strong to clean off using any toilet cleaner. Then I start searching for the right home ingredients that can sort out my problems. I came to know about these home ingredients.
Although I use them for other cleaning purposes, I was utterly unaware of using them to clean the toilet bowl. It works magically and gives me the best cleaning experience.
After that experience, I regularly use these home ingredients to clean my toilet bowl and make it fresh within 15 to 20 minutes. To make your experience better, you can consider dual flush toilets for your home.
Why Vinegar & Baking Soda Are Used in Cleaning Toilets?
Vinegar and baking soda are the two best cleaning home ingredients with acidic components to work against the strong odor and strong stains.
The acidic nature of vinegar and baking soda helps to break down the build-up and grime in your toilet bowl. Additionally, the bubbling action of these two home ingredients also helps to remove the stains quickly.
Here are some advantages of using vinegar and baking soda to clean your toilet:
- Vinegar and baking soda are natural disinfectants
- Compared to other cleaning products, they are much cheaper
- Using them is safe and non-toxic
- They are easily available in any household
Just you need to use the right proportions of these ingredients while cleaning your toilet so that you get the best results.
Step by Step Guideline on Cleaning Toilet Bowl
Do you know? According to the famed housekeeping magazine Hints from Heloise, cleaning your toilet bowl with vinegar is a simple and quick procedure. All you’ll need is white vinegar, baking soda, and a toilet scour brush.
When I clean my toilet with vinegar and baking soda, I follow these straightforward steps. You should go through my recommended tips and follow all the quick & easy steps to get the job done:
Step 01: Pour the Vinegar into the Toilet Bowl
Before adding the vinegar to your toilet bowl, you must use the flash to remove the extra dirt from the toilet bowl. It’s an essential requirement before cleaning any surface. Otherwise, it will ruin your day. You can double flush the toilet to remove and water-clean the surface before applying the vinegar to it.
After doing that, you need to put one cup of distilled or white vinegar in the toilet bowl. Don’t put vinegar and baking soda at a time. When you are done putting the vinegar in the toilet bowl, you should wait one minute before adding the baking soda.
If you don’t have white or distilled vinegar, you must buy it. Vinegar of any other type will not give you the cleaning results you expect. It might add a mess to your toilet bowl because only the distilled vinegar has the strong acidic reaction to work against the solid stains and the odor.
Step 02: Add the Baking Soda
After putting the distilled vinegar into the toilet bowl, you need to add one cup of baking soda to the vinegar. You can put it as you put in vinegar. There will be no issues if the vinegar and the baking soda mix and create the mixture. It will be for about a few seconds.
Your baking soda must be fresh, and it should not come near the expiry date.
Step 03: Scrub and Wait for 15 to 20 Minutes
When you add the baking soda over the vinegar, you need to scrub for 2-3 minutes. The vinegar and baking soda will remove the stains and the odor by that time. You’re not done yet. Wait for 15 to 20 minutes and let the mixture get through the smell and stains.
When you scrub and wait for fifteen to twenty minutes, the vinegar and baking soda will remove all the stains from the toilet bowl. It will also work against dirt and germs. And, you will get the perfect toilet bowl only after fifteen to twenty minutes.
Step 04: Flash & Clean the Toilet Bowl
Since you’re waiting for desired minutes, you should now flash and clean the toilet bowl. It will be ready to remove the vinegar and baking soda mixture. You will see a nice and beautiful toilet bowl after the first flash.
If you find any extra dirt or vinegar on the toilet bowl, you need to flash against it and scrub that area if needed. It will look like a new toilet bowl since there will be no more stains and odors.
By following my tips and the vinegar and baking soda method, you will get a clean and germ-free toilet bowl. Also, your toilet bowl will look new for an extended period.
Frequently Asked Questions
While cleaning the toilet bowl with vinegar and baking soda, you might have some questions in your mind. Now, I will answer some of the most frequently asked questions:
1. Does Vinegar Damage Toilet Bowls?
No, vinegar will not damage your toilet bowl. Vinegar is a safe and effective way to clean your toilet and it removes dirt, grime, and mineral stains from toilet bowls. Just make sure to use distilled vinegar or white vinegar for cleaning toilets.
2. How Often Should I Clean My Toilet Bowl with Vinegar?
You should clean your toilet bowl with vinegar once a week. But, if you have pets or kids at home, then you might need to do it more often.
3. Is Baking Soda Safe for Toilet Bowls?
Yes, baking soda is safe for the toilet bowl. It’s a natural cleaning agent that removes dirt and grime from surfaces. While cleaning with baking soda, just make sure to use gloves and avoid contact with the skin.
Closing Words
If you follow my process of cleaning the toilet bowl with vinegar and baking soda, you will get the perfect result. Just remember to use distilled vinegar and fresh baking soda for the best results.
Now you know how to clean your toilet bowl with vinegar and baking soda. I hope you found my tips helpful. If you do it regularly, you will never have to call a plumber to fix your toilet bowl. It will be as good as new every time. So, don’t forget to add these two ingredients to your shopping list.