Threaded air compressor fittings are a vital part of any industrial or commercial setting, but they can be challenging to maintain. The threads on these fittings need to be constantly protected from corrosion and wear.
But your air compressor fittings can leak if not properly sealed. The problem with leaking compressor fittings is that it wastes energy and money.
Not only does the machine have to work harder to compensate for the loss of pressure, but you’re also wasting gas or electricity because your equipment isn’t running at full capacity.
So, it makes sense to invest in the best thread sealant for air compressor fittings. However, not all thread sealants are created equal. You should choose a thread sealant that is compatible with your air compressor.
For the purpose of facilitating your search, we have compiled a list of the seven best sealants for air compressor fittings.
Dixon Valve Thread Sealant
Vanguard Sealants Sealant PTFE
Rectorseal Thread Sealant
Here are the Top 7 Thread Sealants for Air Compressors
In order to achieve the highest possible air pressure, it is essential to choose the best sealant tape for air compressor fittings.
The air compressor fittings must be airtight in order to provide an efficient supply of compressed air. Listed below are the top seven thread sealant tapes for air compressor fittings:
1. Dixon Valve Thread Sealant for Air Compressor
An air compressor fittings with excessive leakage or where the pipe threads are worn out can be repaired using a continuous strip of thread sealant tape wrapped along its length.
In order to create water-tight pipe connections, the Dixon Valve TTB75 PTFE Industrial sealant tape is an effective wrap to use.
This sealant tape is suitable for air compressor fittings since it prevents leakage, corrosion, and wear on the threads of the male plugs and prevents corrosion. Dixon Valve thread sealant for air compressor measures 520″ long, 3/4″ wide, and 3.5 mils thick.
The temperature range of the tape sealant is from -212 degrees Fahrenheit up to +500 degrees Fahrenheit. Also, the thickness of this sealant tape contributes to its ability to act as an air leak sealant tape by preventing the punctures and tears that are common with polytetrafluoroethylene tapes that are of this thickness and must be constantly reapplied.
Furthermore, the transparency of this sealant tape allows it to be easily seen during the installation process in order to ensure a perfect installation.
The weight of this Dixon Valve TTB75 PTFE sealant tape is 0.32 ounces. This sealant tape works best when it is used according to the instruction manual.
- Used to create air and water-tight connections.
- 520″ long, 3/4″ wide, and .09mm thick for multiple uses.
- Operating temperatures range from -212 to +500 degrees Fahrenheit.
- Color PTFE tape.
2. Vanguard Sealants – Best Thread Sealant PTFE Plumbers
Thread sealant from Vanguard Sealants is essential for tightening air compressor connections. This sealant tape from Vanguard Sealants is made from PTFE, which can withstand extreme temperatures, making it an ideal product to keep on hand in case of an accident.
Brass finishes add a touch of elegance to any installation requiring a watertight seal. These thread sealants are not only easy to use but have more capabilities than other sealants. The self-adhesive properties of this pipe thread sealant make it suitable for both old and new fittings.
Therefore, the next time you have to use it, you will have no problem removing the previous application that you had applied and ensuring that your connections or fittings are completely protected from leaks.
This PTFE tape sealant can be used for joint leak proof and many projects around the home and beyond, including pipes, sprinklers, showerheads, gas heaters, and more. Consequently, this product can be considered as the best thread sealant for air compressor fittings.
If you are uncertain whether the product will meet your needs, simply apply a small piece and see whether it fits before using the entire roll.
These tape sealants are resistant to temperatures between -212°F and 500°F. It is compatible with metals. It’s a 1/2″ x 460″ sealant tape, and it’s made in imperial measurements. This sealant tape weighs 0.32 ounces.
- The brass finish offers a perfect touch.
- Makes a water-tight seal that lasts a lifetime.
- Made from PTFE which can withstand temperatures from -212F to 500F.
- It’s anti-seizing and easy to apply and remove.
3. Rectorseal Thread Sealant
Rectorseal thread sealant is widely used among contractors and industry professionals because it is specifically designed for use in connection with compressor fittings, pipes fittings, and hydraulic fittings.
As it comes in 1-3/4 ounce tubes, which provide sufficient coverage over most applications, these paste sealants make it versatile enough that you won’t have to keep purchasing different sizes for all fittings that you may have on hand.
The thread sealant measures 1.75 oz in volume and comes in a container-style tube. These paste sealants are available in yellow colour. The Thread Sealant is designed to withstand liquid flow pressures up to 12000 psi and gas pressures up to 2,600 psi.
The Full Cure Soft Set Pressure Test is performed immediately, and the application time is not specified. The application temperature range of this liquid thread tape is between 20°F and 140°F, and the performance temperature range is between -50°F and 400°F.
There is a maximum flashpoint of 150 degrees Fahrenheit for these paste sealants. In terms of specific gravity, this high-pressure thread sealant has a specific gravity of 1.38 and a viscosity of 40,000 cPs. This pipe thread sealant is included in the unit’s instructions. This product weighs 1.60 ounces.
- Offered in 1-3/4 ounce tubes for various applications.
- Comes in a container-style tube.
- Gas pressures of 2,600 psi and liquid pressures of 12,000 psi.
- Full Cure Soft Set Pressure Test is performed immediately.
4. Supply Giant Air Compressor Fitting Sealant
Supply Giant air compressor fitting sealant is a white tape intended for use in residential, commercial, and industrial settings.
Created as an economical grade, the thread sealant tape offers better seal compatibility to be used with pipes of all sizes as well as standard quality for both residential and commercial use. The standard solution is one of many, with varying widths to fit any job.
The applications are guaranteed to be maintenance-free, non-toxic, and non-flammable. With the use of the PTFE tape, this tape for air compressor fittings is protected against wear on their pipe thread and corrosion, which means they will not have to be replaced anytime soon.
This sealant provides excellent sealing performance. You can rely on it for joint leak proof. With the use of PTFE tape sealant, leaks and cracks can be prevented. Using this tape for sealing air compressor fittings can save you money in the long run. Additionally, this can assist you in getting the correct compressed air from your air compressor.
The standard size is 3/4 inch wide by 260 inches long, providing adequate sealing capacity for all sizes of pipe thread. The elastic is less sticky to the fingers and the sealant tape is easier to remove than some other sealants.
Plumbing, industrial supply, OEM, and maintenance applications are suitable for this thread sealant. The PTFE thread sealant tape is created to be used with oxygen, oil, water pipe, and gas. This sealant is designed in a way that it will not harden or crack anytime.
- Maintenance-free, non-toxic, non-flammable.
- Compatibility for use with pipes of all sizes.
- Compatible with standard quality residential and commercial settings.
- Easy to remove thread sealant tape.
5. Skylety Thread Sealant for Air Fittings
Skylety Thread Seal Tapes are a great solution for leaking compressor fittings, as they prevent leakage. It is a standard quality thread sealant that is safe to use on gas fittings, water pipe fittings, and garden hose faucets fittings. These tapes are suitable for residential, commercial, and industrial applications.
Using Skylety Thread sealant tapes will protect you against leaks and corrosion on threaded male plugs since they are made from a Teflon compound that is four times heavier than standard tapes.
Because Teflon tapes are non-hardening or non-cracking, they are well suited to sealing air compressor fittings, corrosion resistance, and anti-aging applications. Thread sealant tape from Skylety can be used to create an airtight seal between threaded pipes and hydraulic fittings on most types of soft water pipes.
These thread sealants are designed primarily for use in homes and piping systems, which means they are a good solution for leaky hot or cold air compressor fittings.
The Skylety thread tape sealant is wrapped around the threaded end of the connector or pipe fittings, then screwed in place. It is less sticky, making it easier to remove.
- Tape is made of heavy Teflon quality.
- Long-lasting tape for sealing, corrosion protection, and anti-aging applications.
- Easy to apply and simple to remove for simple, quick installation.
- Suitable for residential, commercial, or industrial applications.
6. La-Co Thread Sealant With PTFE
The La-Co thread sealant with PTFE is a high-quality thread sealant that can be used for repair and protection to pipe fittings. This pipe thread sealant gives a great sealing performance in any situation but is especially useful in applications where deterioration and corrosion may happen faster than in other areas.
It’s not limited to just these types of cases, though, making it versatile enough that you’ll use this product over and over again.
The thread sealant is a great choice because it can save you time and money while making sure everything works the way it should. Plus, you’ll be able to get back to your main task quickly and conveniently.
The product is composed of a non-toxic chemical composition that doesn’t cause harm when used. It’s also an easy solution to use for most people, without requiring any prior training or special tools.
If you need to make another repair in the future, you can remove this pipe thread tape with ease. This air fitting sealant will not cause damage to the hydraulic line fittings, but rather it will help protect against corrosion and wear that would otherwise take place.
It works well in various temperatures, from -450 degrees Fahrenheit to 550 degrees Fahrenheit, and provides a maximum pressure level of 10,000 PSI (680 Bar). The thread sealant is yellow for use in gas lines and measures 260 inches in length. The tape is four mils thick, and the unit weighs 0.480 ounces.
Because the pipe thread sealant is durable and long-lasting, it will get the job done right. In addition to being safe to use with solvents and chemicals, the product can also be used on food production lines.
- Non-toxic composition won’t harm the pipe fittings.
- Measuring 260 inches long and has a thickness of 4 mils.
- Suitable for use with solvents, chemicals, oxygen, and on food lines.
- The sealing temperature ranges from -450°F to 550°F.
7. Gasoila Thread Sealant
The Gasoila thread sealant tape is constructed of PTFE resin. The polymer is made up of recurring Tetrafluoroethylene monomers. Gasoila Thread sealant tape made of PTFE is compatible with a wide range of materials, such as galvanized steel iron, brass, aluminium, copper, polyethylene, polypropylene, PVC, fibreglass, stainless steel, and more.
The white thread sealant tape measures 260 inches in length and 1/2 inch in width. This PTFE thread sealing tape is safe, maintenance-free, and non-flammable. The thread sealant tape is easy to use, fast, and suitable for sealing pipe threads of all sizes.
This thread sealant tape is easy to apply. It can be applied by wrapping it around the male end of the pipe. The directions for the application of the thread sealant are precise and clear. This thread sealing tape can protect against leakage, corrosion, and wear if it is applied correctly.
It is possible to seal a pipe’s thread using this thread sealant tape with a pressure of up to 10,000 pounds per square inch. The temperature ranges from -450 degrees Fahrenheit to 550 degrees Fahrenheit. This air line sealant weighs 1.45 Ounces.
- Constructed of PTFE resin.
- Compatible with a broad range of materials.
- Measures 260 inches in length and 1/2 inch in width.
- Easy to apply by wrapping it around the male end.
- Can be used at pressure up to 10,000 PSI.
Factors to Consider When Selecting a Thread Sealant for Air Compressor Fittings
When selecting the best thread sealant for air compressor fittings, there are some factors that should be taken into account that are essential to the end-use of the fittings. The following factors should be considered:
1. Thread Sealant Type
It is important to consider the type of sealant when choosing the best thread sealant for air compressor fittings. There are various types of thread sealant tape available in the market, but some are more useful than others depending on your need. Ensure that the one you choose is suitable for your air compressor and hot oil seal. These days, PTFE (Polytetrafluoroethylene) tapes are highly recommended by experts. The tapes can be easily applied to your new fittings.
2. Length of The Tape
The length is another important factor to consider when it comes to choosing the best thread sealant for air compressor fittings. You need to select thread sealant tape according to your requirement. If you need a long length of pipe thread sealant, then buy a large size tape.
3. Thickness of the Tape
The thickness of the thread sealant is another factor to consider. You need to select the thickness of the thread sealant depending on how well you want it to work.
4. Temperature Resistance
The thread sealant tape should be chosen according to the temperature resistance for your hot or cold air compressor fittings. If you are an industrial user, then it is advisable to buy a product that can tolerate high heat levels.
5. Pressure Level
The pressure level depends on how much extreme pressure you want your thread sealant to endure. The more the pressure, the better it is for you as well as for your application. Always buy a product that is designed for the maximum pressure level.
6. Material Compatibility
Before buying a thread sealant, you need to check its material compatibility. If it matches with all kinds of materials, then go for that particular product or else search for one that matches your requirements. Furthermore, you must select a sealant that is compatible with the hot oil seal. A lot of times, PTFE tapes are recommended for their wide range of compatibility.
Following are answers to a few FAQs that will help you better understand thread sealant for threaded air fittings.
How to Seal Air Compressor Fittings?
You can seal air compressor fittings by applying thread sealant tape around the male end of the fittings. However, make sure to follow the instructions on the packaging and apply it with care.
Can I Use Teflon Tape on Air Fittings?
Yes, you can use Teflon tape on male air fittings to prevent leakage. However, you need to wrap it properly around the male end of the fitting to prevent air from escaping.
How Do I Stop My Air Fitting from Leaking?
You can stop air fittings from leaking by applying a thread sealant tape around the male end. However, you need to ensure that it is done properly and carefully not to harm the fitting or affect its integrity.
What Do You Seal Air Compressor Fittings with?
Air compressor fittings can be sealed with thread sealant tape. This tape is specifically designed to work for air compressors and will do the best job when used cautiously under its manual.
The best thread sealant for air compressor fittings needs to be chosen according to the factors discussed above. PTFE tape is recommended by professionals since they are durable, easy to apply, and will last long without getting damaged. This is why it is important that you pick a product that has all or most of these features.
All of the products we’re reviewing above are of good quality, so feel free to pick anyone depending on your needs and requirements. Make sure to buy a thread sealant tape that is compatible with all kinds of materials, high in a pressure resistance level, and can bear extreme temperatures as well. We hope that you are satisfied with your purchase of our recommended products.