How to Rough in a Double Sink Vanity

How to Rough in a Double Sink Vanity

You know how important double sink vanities are for your home to enhance the look of your home. It helps to enhance the look of your home as well as your daily routine. Many homes have a sink vanity inside or outside the toilet.

But you can arrange a double sink vanity if you want. This is not difficult for you. The materials you need to collect for this are very readily available. If you can get an idea of it, you can easily set up a double sink vanity.

Important materials of Double Sink Vanity Rough In

Important materials of Double Sink Vanity Rough In

There are several things you can do to buy a Double Sink Vanity at home if you don’t have them. Without these, you will fail to do your job. If you already know what things will take time to do your job, then it will be easier for you.

• You must first assemble two sink drain assemblies.
• Now you need to collect two more Faucets.
• You will need to purchase two double-outlet shut-off valves for the sink.
• It will take a level of 4 feet.
• Need to collect a saw for cutting.
• Need to collect a measuring tape.
• You need to collect the 90-degree drain elbow.
• For the P trap, you need to have an extension on hand.
• Now you collect a drain trap adapter. You must keep it.

The necessary process to rough in a double sink vanity

The necessary process to rough in a double sink vanity

Sinks enhance the beauty of your home. But double sinks enrich the beauty of your home. You may not know how to install double sync. But it is not so difficult. It will be easier for you to do if you know some good things.

You can install the sink anywhere in your bathroom or room. There are several steps you’ll fancy to begin the method of preparation for mediation.

1st method: Measure to prepare the sink vanity

Your first task for a double sink will be to choose a good-sized sink. If you want to make a standard drain for your double sink, you must take the appropriate amount of sink. You can get a standard size if you install at least a 30-inch sink.

You need to choose a sink that has enough space when buying a sink. If the sink is big, it will be very convenient for you. Another thing you need to keep in mind is that your sinks should be at least 6 inches apart.

If that does not happen, it’s still how to urge more involvement. So when installing the sink you need to pay attention to its size.

2nd method: Adding drain assembly

Once you have confirmed the sink sizes and are aware of the drain sizes, your next task will be to attach the drain assembly. One thing you must be aware of is that after connecting the drain assembly to the two sinks then installing the sink.

I want to convey that I recommend for the mother to be inactive. Before double-check packaging, you need to make sure that fasteners are attached. If it is not attached, you will need to purchase it separately.

3rd method: Level and measurement

Now you need to use a layer to install the sink. The level should be at least four feet long. You will place it on the side of your wall that has a drain. Another thing you need to keep in mind is that your sink should be centered on bubbles.

Now you need to measure your tape. The tape should be measured according to the height of the level with the drain. You can install one for this. This will help your double sink to be connected to the drain.

4th method: Divide each and cut

When you finish leveling, your next task will be to cut. You need to cut the pieces hanging from the drain. You can use a saw for cutting. You need to be careful when cutting it so that there is no problem with your size.

Then you have to install the elbow of the 90-degree piece. Use the right length of pipe. You must be aware of this because if the size of the pipe is not correct, it will not work properly.

5th method: Connect the P trap

When you can carry the bag properly, your job will be to attach the P trap to the tee. It has to be connected to the drain next to the wall. You can use an adapter. You will need to use the adapter to fit the P trap in the drain pipe. Without it, you can’t take the step of attaching your P trap.

6th method: Separate the shut-off valves from the pipe

Now your job is to keep the shut-off valves separate from the hot water and cold water pipes. Before that, you must turn off the water. Now you need to collect a double outlet valve. You can’t do it without it. If it is not in your hand, you need to bring it.

7th method: Connect the double outlet valve

When you can get a double outlet valve for your sink vanity, your next and last task will be to connect it. You will need to use a mesh supply pipe because it is much easier to cut and assemble. When it is connected, you will know that your work is done.

The exact distance to the supply line

The exact distance to the supply line

The double sink vanity is as beautiful to look at as it is useful to use. You need to determine the distance to the supply line. For this, you need to determine two holes. You need to keep the height of the supply line at least 3 inches from the drainpipe to install the sink.

Conclusion

Lastly, when you want to enhance the look of your home’s bathroom, you must think about how to double the sink vanity. When you install a sink at home, you must have all the necessary materials in advance to install a double sink vanity.

This is because when the double sink vanity is installed, you may not have the necessary materials for it. So, if you know what you need and buy the right products, it will be easier for you.

How to Rough in a Double Sink Vanity
Scroll to top