ABS is the plastic pipes utilized in the construction of building in the drain-waste-vent pipe system, and for insulation of electrical cables and sometimes for a hot water drainage system.
While PVC glue is a material that is used to soften the plastic to create a strong bond, it makes your work relatively easy and quick that you can bond the plastic pipes within 30 seconds.
PVC glue is commonly used on PVC pipes and not in practice on ABS pipes, but some recommends its use that it works fine with ABS pipes.
Our discussion today is about the use of PVC glue on ABS. We will provide you with reliable information.
Oatey PVC Pipe Cement
What is the Difference Between PVC Pipe and ABS Pipe?
Before discussing the use of PVC glue on ABS, we should discuss the difference between PVC pipe and ABS pipe; it will help us understand better.
What is PVC Pipe?
One of the modern and cost-effective solutions for metal pipes is PVC pipe. It is a soft pipe that gives durability, versatility, and very simple to install.
These pipes are manufactured with polyvinyl chloride. Its soft nature can mold and fit at any place in the building plumbing work.
Charlotte PVC Pipe
Pipes are bond with PVC glue that is manufactured according to soft and thermoplastic features.
PVC pipes are also known as the sewage pipes and install for irrigation or sewage systems.
What is ABS Pipe?
ABS pipes are used in the plumbing work in the buildings, but these pipes are installed at sewer systems or electrical cables’ insulation.
They are rigid pipes, so they cannot mold as the PVC pipes. These pipes are bond with special ABS glue. These pipes are manufactured from Acrylonitrile-Butadiene-styrene that is a thermoplastic resin. You can use these glues on the outputs from any budget ABS 3D printer but suggested for decoration purposes only.
Experts ask that you never use the ABS pipes with water drainage or sewage system; otherwise, you will see leakage and many other problems. But it can also be useful to use for hot water.
Which one is More Rigid, PVC Pipe or ABS Pipe?
PVC pipes are softer than ABS pipes; you can mold these pipes and use them in the building. You can only use it for the cold or typical water drainage system.
While the ABS pipes are more rigid and cannot mold, you can use ABS pipes anywhere like hot water drainage and electrical cables.
Resistant Against Weather:
We found that ABS pipes have excellent resistance against weather effects than PVC pipes while we compare these two pipes. So, only recommended glue will perform well with the right choice.
Does PVC Glue Work on ABS?
You have read about pipes, their uses, and nature. There is a significant difference in the nature and features of both pipes.
From the information have learned that never try to switch between PVC Glue and ABS glue.
But sometimes we need to join the connection of both of the pipes; at that time we need to use both of them combine. There is special green glue available in the market which can use on ABS.
PVC glue to ABS only means connecting these two systems, such as when water drainage system inside and outside of the home. Only at that place where we connect them can we use the green glue or PCV glue, but not another place.
Is it Possible to Interchange the Glue in the Plumbing?
No, it is strictly prohibited in the plumbing rules never to use the wrong glue. You can only use the PVC glue for PVC pipes and ABS glue for ABS pipes.
Only at some points, such as when you need to connect two different pipes, you can use it; otherwise, it is prohibited.
How Much Time Need to Dry PVC Glue?
PVC glue takes just 30 seconds to dry when we apply it on the pipe, and we need to hold the pipes. It takes 15 minutes to become hardened, and you can also use it for the water after two hours of its applying.
How Much Time Need to Dry ABS Glue?
While you apply the ABS glue, it takes a minimum of two hours to dry, and after 24 hours, it becomes hardened.
Capacity to Hold the Temperature for PVC Glue and ABS Glue:
The temperature has a significant effect on the performance and bondage of the glue. PVC glue works between -15 degrees Fahrenheit to 40 degrees Fahrenheit; you cannot run the pipe’s hot water.
While the ABS glue has more resistance against temperature than PVC glue, it can hold at 60 degrees centigrade. You can also run the hot water from the ABS glue bond pipes.
What are the Differences Between PVC Glue and ABS Glue use on Pipes?
You can apply the glue to the PVC pipes with simple steps; first, measure and cut the pipe. Once you have cut the pipes, and then make sure that the pipes are dry.
After that, apply the glue to the pipes and insert these pipes for 30 seconds; after 15 minutes, they will become harder and can use. But do not apply too much glue; otherwise, bondage will be weak.
While the ABS glues required proper cleanliness of the pipes and after that, when you measure and cut the pipes, apply massive glue.
ABS pipes are more rigid and massive in weight, so they need intense bondage. When you have applied the glue, fix the pipes, and leave them a minimum for two hours, but a satisfying bond will be after 24 hours.
Can We use PVC Glue on ABS?
The answer to that question is sometimes ‘yes’ but most of the times ‘NO’ we have discussed PVC glue and ABS glue and PVC pipes and ABS pipes.
We compare all the above with their use, materials of manufacturing, effects of weather, resistance against temperature, and their ways of applying.
Gorilla PVC Glue
In our opinion, you can use PVC glue only when you make the connection between PVC and ABS pipes. Never use PVC glue with ABS pipes in standard ways. Always use ABS glue for the ABS pipes if you want a good performance.
An Interesting Glue Resource: List of Glue For Clay Pot
PVC glue has many benefits, and it makes us able to bond the pipes for the water drainage system. It provides us with quick results, and within 30 seconds, we can bond the pipes.
It also works with ABS but only when we need to join both pipes, such as PVC pipes and ABS pipes.
But it does not work for the ABS pipes in other uses. PVC glue has low resistance to bear temperature, weather effects, and also to lift the weight. So, never apply PVC glue on ABS.